Sign In | Join Free | My himfr.com
Home > EV Connector Testing Equipment >

Electric Vehicle Withdrawal Force Latching Verification Test Apparatus IEC62196

Sinuo Testing Equipment Co. , Limited
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now
    Buy cheap Electric Vehicle Withdrawal Force Latching Verification Test Apparatus IEC62196 from wholesalers
     
    Buy cheap Electric Vehicle Withdrawal Force Latching Verification Test Apparatus IEC62196 from wholesalers
    • Buy cheap Electric Vehicle Withdrawal Force Latching Verification Test Apparatus IEC62196 from wholesalers
    • Buy cheap Electric Vehicle Withdrawal Force Latching Verification Test Apparatus IEC62196 from wholesalers
    • Buy cheap Electric Vehicle Withdrawal Force Latching Verification Test Apparatus IEC62196 from wholesalers
    • Buy cheap Electric Vehicle Withdrawal Force Latching Verification Test Apparatus IEC62196 from wholesalers

    Electric Vehicle Withdrawal Force Latching Verification Test Apparatus IEC62196

    Ask Lasest Price
    Brand Name : Sinuo
    Model Number : SN1013
    Certification : Calibration Certificate (Cost Additional)
    Payment Terms : T/T
    Delivery Time : 15 days
    Price : Customized
    Supply Ability : 30 Sets / Month
    • Product Details
    • Company Profile

    Electric Vehicle Withdrawal Force Latching Verification Test Apparatus IEC62196


    IEC62196 Electric Vehicle Withdrawal Force And Latching Verification Test Apparatus


    Complied Standards & Clauses



    IEC 62196-1:2020 clause 14.1.5, 14.1.6, fig13, fig14.

    IEC 62196-1:2014 clause 17.2.


    Equipment Overview



    This test equipment conforms to IEC 62196-1:2020 clause 14.1.5, 14.1.6, fig13, fig14. IEC 62196-1:2014 clause 17.2. It is used to check the maximum force required when the test plug is withdrawn from the socket-outlet or vehicle connector and the minimum force required when the single-stage pin is pulled out of the socket. It is also used to verify the design of contact tubes can ensure adequate contact continuity before and after a number of operations corresponding to their operational life.


    Technical Parameters



    A Maximum withdrawal force

    The maximum withdrawal force of the socket-outlet shall meet the requirements of Table 1.

    Apply the maximum withdrawal force specified in the standard (total force of the principal weight, supplementary weight, hook (clamping device) to the test plug, when the supplementary weight is dropped from a height of 50mm, the plug should come out of the socket.

    User should select an appropriate weight for the test according to the following table:


    Sample type

    (AC A)

    Withdrawal

    N

    Principal weight

    N

    Supplementary weight

    N

    6-40165148.516.5
    41-8030027030
    81-15044039644
    151-250660396+148.5+49.566

    Sample type

    (DC A)

    Any750396+148.5+49.5+1575
    Clause 17.2 A
    <5915013515
    60-99275247.527.5
    100-125400270+9040
    Note: The principal weight already contains the test plug and hook weight

    B Minimum withdrawal force

    Insert the gauge with the minimum withdrawal force specified in the standard (that is, the test pin (single pin) that meets the requirements of this standard, the total mass of the pin should be equal to the value specified in the table) into each individual socket in the socket-outlet. The gauge must not be removed from the socket within 30 seconds.


    Nominal pin diameter

    mm

    Diameter of gauge

    mm +0 -0.01

    Minimum total force

    N

    54.802.5
    65.805
    76.805
    87.8010
    109.8015
    1211.8020
    Note: The minimum withdrawal force already includes the weight of the gauge

    C Structure features

    This device is mainly composed of the installation fixture, the clamping device, principal weight, supplementary weight and the test plug. Based on experience, the pull clamp is changed to a counterweight, the weight hook is directly connected to the test plug, and the fixture for holding the sample is configured. The specific shape is shown in figure 1.

    Electric Vehicle Withdrawal Force Latching Verification Test Apparatus IEC62196


    D Test plug

    The test plug, according to the relevant standard sheets, shall have finely ground contacts of hardened steel, having a surface roughness not exceeding 0,8 µm over their active length and spaced at the nominal distances, with a tolerance of ±0,05 mm.

    The dimension of the plug contacts or the distance between contact surfaces for other types of plug contacts shall be in accordance with the minimum dimension(s) given in the relevant standard sheets, with a tolerance of +0,010mm

    The test plugs are not included in this test apparatus, please use those test plugs that client already ordered separately as following:


    No.:StandardFigure No.:NameQTY
    1IEC62196-2/Ed.3/CDV © IEC(E)STANDARD SHEET 2-I sheet 1Test-plug1:32A,250 V AC VEHICLE INLET1
    2IEC62196-2/Ed.3/CDV © IEC(E)STANDARD SHEET 2-Ilb sheet 1Test-plug1:63 A, 480 V THREE-PHASE OR 70 A, 250 V SINGLE PHASE1
    3IEC62196-2/Ed.3/CDV © IEC(E)STANDARD SHEET 2-Ild sheet 1Test-VEHICLE INLET2: 63 A, 480 V THREE-PHASE OR 70 A, 250 V SINGLE PHASE1
    4IEC62196-2/Ed.3/CDV © IEC(E)STANDARD SHEET 2-Ilf sheet 1Test-VEHICLE INLET3: 63 A, 480 V THREE-PHASE OR 70 A, 250 V SINGLE PHASE1
    5IEC62196-2/Ed.3/CDV © IEC(E)STANDARD SHEET 2-Illa sheet 1Test-Plug 4: 16 A, 250 V SINGLE-PHASE PLUG WITH 1 PILOT CONTACT1
    6IEC62196-2/Ed.3/CDV © IEC(E)STANDARD SHEET 2-Illb sheet 1Test-Plug 6: 32 A, 250 V SINGLE-PHASE PLUG WITH 2 PILOT CONTACTS1
    7IEC62196-2/Ed.3/CDV © IEC(E)STANDARD SHEET 2-Illc sheet 1Test-Plug 8: 63 A, 480 V THREE-PHASE PLUG WITH 2 PILOT CONTACTS1
    8IEC62196-3/Ed.2/CDV © IEC(E)STANDARD SHEET 3-Ib
    Sheet 1
    Test VEHICLE CONNECTOR 101
    9IEC62196-3/Ed.2/CDV © IEC(E)STANDARD SHEETS
    CONFIGURATION BB
    VEHICLE COUPLER 250 A 900 V DC
    STANDARD SHEET 3-Iia Sheet 1
    Test VEHICLE CONNECTOR 111
    10IEC62196-3/Ed.2/CDV © IEC(E)STANDARD SHEET 3-IIIa Sheet 2Test VEHICLE INLET 121
    11IEC62196-3/Ed.2/CDV © IEC(E)STANDARD SHEET 3-Iva VEHICLE INLETMODES 2, 3 AND 4 Sheet 2Test VEHICLE INLET 131
    12IEC62196-3/Ed.2/CDV © IEC(E)STANDARD SHEET 3-Ivb VEHICLE INLET ALL MODES Sheet 1Test VEHICLE INLET 141

    E Test pins

    The test pins are not included in this test apparatus, please use those test pins that client already ordered separately as following:


    Nominal pin diameter

    mm

    Diameter of gauge

    mm +0 -0.01

    Minimum total force

    N

    54.802.5
    65.805
    76.805
    87.8010
    109.8015
    1211.8020
    Note: The minimum withdrawal force already includes the weight of the gauge
    Quality Electric Vehicle Withdrawal Force Latching Verification Test Apparatus IEC62196 for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Sinuo Testing Equipment Co. , Limited
    *Subject:
    *Message:
    Characters Remaining: (0/3000)