IEC 60529 IPX1 IPX2 Vertical Rain Drip Box Water Ingress Test Chamber

Complied Standards & Clauses

IEC60529:2013 “Degrees of protection provided by enclosure (IP code)” IPX1 and IPX2.

Equipment Overview

Structure: The device is composed of a drip mechanism and an electric control cabinet. The drip box is fixed to the top of the chamber. There is a turntable, has a rotation speed of 1r/min, used for IPX1 test; With 15° sample support block, used for IPX2 test; the height of the turntable can be adjusted manually, matching the distance 200mm from the needle to the sample. The test equipment is equipped with a water filter cleaning device to prevent pinhole blockage. This whole system adopts chamber structure.

Samples and Restrictions: Electrical and electronic products, automobiles, motorcycle parts, communication products, household appliances, outdoor lighting and signal devices, etc

Application: To verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household appliances, seals and lamps under water dripping at degree IPX1 and IPX2.

Principle: Ensure that the dripping speed reaches the standard required value by controlling the water supply flow, the test equipment can produce a uniform flow of water drops over the whole area of the enclosure.

Use Environment: Power supply: AC380V±5%/50Hz, 3KVA, or match client’s local power supply requirements.
Use place: temperature 15-35 ° C, relative humidity 25%-75%, atmospheric pressure 86 ~ 106kpa (860 mbar -1060 mbar), there should be equipped with lighting and waterproof leakage switch (or socket), the ground needs to be flat, and the water intake and drainage function should be good.
Water source: clean water or tap water without impurities, equipped with water cleaning filter.

Technical Parameters

Control & Operation	PLC and touch screen intelligent control system
Chamber Size	Inner: WDH=800×800mm×800mm outer: WDH=1280×900mm×1750mm Can be customized according to client's requirements
Drip Area	WD=600×600mm, other sizes can be customized
Drip Height	200mm distance of the needle to the sample is achieved by adjusting the height of the turntable or raising the specimen
Drip Speed (Water Flow)	1+0.5 0mm/min or 3+0.5 0mm/min adjustable
Needle Pinhole Aperture	Φ0.4mm
Drip Hole Spacing	20mmx20mm
Turntable	Diameter: Φ400mm, rotation speed:1-5r/min, with a 15° sample support block and a lifting bracket, bearing capacity ≤20kg
Drip Box Position	Located at the top of the inner chamber, fixed
Test Time	0-99.9min, can be preset
Chamber Material	Inner chamber adopts SUS304 stainless steel
Water Circulatory System	There is a clean filter device at the water inlet, and the drip water is automatically collected into the storage tank through the chassis and can be recycled.
Safety Protection	Phase sequence protection, leakage protection, water shortage protection, abnormal protection

Details:

---

Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle test equipment, battery testing equipment,  electromagnetic compatibility (EMC) test system, environmental testing equipment, fire retardant test equipment, dust-proof waterproof testing equipment and electrical appliances testing equipment. Our products covering electrical vehicle, electric power, communication, electrical appliances and electronic devices industries.

Sinuo has a professional technical research and development team, which is proficient in various international standards such AS IEC, ISO, EN, VDE, BS, AS, ASTM, GB and industry standards such AS MBN LV124, VW-80000. We master physical mechanics, heat, electricity, fluid and other theoretical knowledge in the application of equipment. And continue to focus on industry standard equipment performance optimization, operation simplification and equipment stability and reliability improvement.

Sinuo has two factories in Guangzhou and Dongguan, and cooperates with many research institutions and schools. Our R&D and production capacity are in the forefront. We have authorized agents in South Korea, the United States, South Africa, Egypt, Pakistan, the Philippines and other places, we serve customers BV, CSA, Intertek, SGS, TUV and other internationally renowned testing and certification institutions, local government quality inspection departments and production factories.