Equipment Overview
1 Product Overview
1.1 Applied standards
This apparatus conforms to IEC60086-4:2014 FIG 1, UL2054 Clause 22 FIG. 22.1, UL 1642-2009 Clause 20 FIG. 20.1, GB
31241-2014 Article 7.9 FIG. E.2.
1.2 Application
Battery Fire Exposure Test Apparatus is an essential test equipment
for battery manufacturers and quality inspection departments. This
equipment has the characteristics of convenient operation, safety
and reliability, and high precision. It is an ideal testing machine
for battery combustion and projectile testing.
1.3 Features
1.3.1 PLC and touch screen for control and operation.
1.3.2 When there is a smoke alarm, the exhaust will automatically
open, and when there is no smoke, it will be closed after a delay.
1.3.3 Unsuccessful ignition alarm and cut off steam source.
1.3.4 Built-in lighting, through external reflection, to ensure the
life and safety of lighting, etc.
1.3.5 The HD video camera and visual window can enable operator to
clearly observe the changes of the test object in the experiment.
1.3.6 With explosion-proof glass, and equipped with steel mesh,
double protection.
1.3.7 Controlled by remote controller, the maximum distance can
reach 10 meters.
1.4 Test procedures
The test battery is placed on a flat table covered with a cover
plate with a 4-inch diameter hole in the middle. Cover plate is
made of steel wire mesh with 20 holes per foot or steel wire 0.017
inch (0.43mm). Place a screen with 8 sides of 2 feet wide (610 mm)
and 1 foot high (305 mm) on each side around the specimen. The
metal mesh consists of 0.010-inch (0.25mm) metal wire at 16-18
wires per inch. The sample is placed on a metal mesh, covering the
hole in the center of the table, and then heated until it explodes
or is destroyed. The direction of the safety valve is parallel to
the asbestos cloth.
Acceptance: No part of the explosive battery penetrates the screen,
and no part or all of the battery protrudes from the screen.
