ISO 16750-4 Corrosion Test Chamber Compound Salt Spray Tester 1m³
Complied Standards & Clauses
It can meet the national standard ISO 16750-4: 2006 Road vehicles
Environmental conditions and tests for electrical and electronic
equipment Part 4: Climatic loads clause 5.5 salt spray test.
Equipment Overview
The equipment has an emergency braking function, and a brake switch
is installed on the equipment. When an abnormal situation occurs,
the equipment can be powered off through the control switch.
The equipment is equipped with corresponding system software, which
can run stably on the provided operating system, and the software
interface is in Chinese or English, the software includes
temperature change test, humidity, precision calibration, and
equipment self-test module.
The system software can record in real time, save automatically,
and optimize data, and can draw temperature-time, humidity-time
curves through software settings.
The system software is set with a safety protection parameter
interface, and after the setting is completed, it will be given
priority during the test process, thereby ensuring the safety of
the test.
The system software can achieve the function of test data security
protection, and the software has the function of administrator,
which can limit the operation authority of general operators.
The system software has the function of post-data processing, which
can support the import of multiple data files, support data
filtering, and support arbitrary X-axis and Y-axis selection.
Technical Parameters
| Total machine power | 15KW |
| Maximum current | 23A |
| Power supply conditions and power supply | AC380V three-phase four-wire system + protective grounding; the
allowable fluctuation range of voltage is ±10%V. The allowable frequency fluctuation range is 50±0.5HZ; TN-S power
supply or TT power supply. The grounding resistance of the protective ground wire is less than
4Ω. The user is required to configure an air or power switch of
corresponding capacity for the equipment at the installation site,
and the switch must independently control the use of the equipment.
When placing electrified samples in the chamber box, please use an
external power supply for the sample power supply, and do not use
the local power supply directly. |
| Product Name | Compound Salt Spray Test Chamber |
| Product model | SN8810C-1m³ |
| Nominal internal volume | 1m³ Note: Does not include the volume of the top sloping roof |
| Effective size of inner box (mm) | 1000×1000×1000 W×D×H Note: The height of the top slope is 600mm |
| External space (mm) | About 1600×2400×2000 W×D×H |
| Weight | About 500kg |
| Bearing capacity | About 80KG |
| Control accuracy | Temperature resolution: 0.1°C Humidity resolution: 0.1%R.H Temperature deviation: ±2.0℃ Humidity deviation: ≤+2-3%R.H when ≥75%RH, humidity deviation: ≤±5%R.H when <75%RH Temperature fluctuation: ±1℃ Humidity fluctuation: ±3%R.H Note: The temperature uniformity and deviation are measured under
the conditions of ambient temperature +25°C, relative humidity ≤85%
RH, and no sample. |
| Heating rate of the test room | RT→+60℃≤45 min |
| Heating rate of saturated tank | RT→+65℃≤45 min |
| Specimen restrictions | This test chamber prohibits: Testing or storage of samples of flammable, explosive and volatile
substances Testing or storage of samples of corrosive substances Testing or storage of biological samples Testing or storage of samples of strong electromagnetic emission
sources Testing and storage of radioactive material samples Testing and storage of samples of highly toxic substances Testing and storage of samples that may produce highly toxic
substances during testing or storage |
Details
