Sign In | Join Free | My himfr.com
Home > Temperature Humidity Test Chamber >

Environmental Testing Temperature And Humidity Chamber 408L

Sinuo Testing Equipment Co. , Limited
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now
    Buy cheap Environmental Testing Temperature And Humidity Chamber 408L from wholesalers
     
    Buy cheap Environmental Testing Temperature And Humidity Chamber 408L from wholesalers
    • Buy cheap Environmental Testing Temperature And Humidity Chamber 408L from wholesalers
    • Buy cheap Environmental Testing Temperature And Humidity Chamber 408L from wholesalers
    • Buy cheap Environmental Testing Temperature And Humidity Chamber 408L from wholesalers
    • Buy cheap Environmental Testing Temperature And Humidity Chamber 408L from wholesalers

    Environmental Testing Temperature And Humidity Chamber 408L

    Ask Lasest Price
    Brand Name : Sinuo
    Model Number : SN881-408L
    Certification : Calibration Certificate (Cost Additional)
    Price : Customized
    Payment Terms : T/T
    Supply Ability : 1 sets/month
    Delivery Time : 45 days
    • Product Details
    • Company Profile

    Environmental Testing Temperature And Humidity Chamber 408L


    Environmental Testing Temperature and Humidity Chamber 408L


    Complied Standards & Clauses



    IEC60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT”

    IEC60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT”

    IEC60068-2-30:2005 “Environmental Testing-Part 2-30: Tests-Test Db: Damp heat, cyclic (12h+12h cycle), IDT”

    IEC60068-2-78:2012 “Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT”


    Equipment Overview



    This test chamber is used for cold, heat, humidity and dryness testing of raw materials and devices such as electronics, electricians, electrical appliances, plastics, etc. The purpose is to confirm the products reliability of storage and transportation under high and low temperature alternating heat and humidity.


    Technical Parameters



    Technical Parameters
    Control & OperationPLC and touch screen intelligent control system

    Chamber Size


    Inner SizeExternal Size
    800*600*850 mm1350*1150*1950 mm
    Temperature Range-40 °C ~+180°C
    Humidity Range20%~98%RH
    Temperature fluctuation±0.5℃
    Humidity fluctuation≤2.5%
    Temperature deviation≤±2.0℃
    Humidity Deviation≤±3%
    Heating Rate≧2-3°C/min
    Cooling Rate≧1°C/min, average no load
    Conditions of use
    a) Installation site

    The ground is flat, well ventilated, and does not contain flammable, explosive, corrosive gases and dust

    There is no strong electromagnetic radiation source nearby.

    There is a drainage floor drain near the equipment (within 2 meters of the refrigeration unit).

    The bearing capacity of the site ground: not less than 800kg/m2.

    There is appropriate maintenance space around the equipment.



    A: not less than 600mm

    B: not less than 1000mm

    C: not less than 100mm

    D: not less than 600mm

    b) Water source requirements

    1. Purified water must be used

    2. Tap water must be treated

    c) Environmental conditions

    1. Temperature: 5℃~35℃

    2. Relative humidity: ≤85%

    3. Air pressure: 86kPa~106kPa

    d) Power supply


    AC380V three-phase four-wire + protective ground wire

    Allowable voltage fluctuation range: AC (380±10)V

    Allowable frequency fluctuation range: (50±0.5)Hz

    Protective ground wire grounding resistance is less than 4Ω

    The user is required to configure an air or power switch of corresponding capacity for the equipment at the installation site, and this switch must be used independently for this equipment

    Power capacityAbout 11kW
    Maximum current23A
    Power switch32A (molded case leakage protector)
    e) Environmental requirements for storage equipmentWhen the equipment is not working, the ambient temperature should be kept within 0℃~+45℃
    Details

    Environmental Testing Temperature And Humidity Chamber 408LEnvironmental Testing Temperature And Humidity Chamber 408L


    Quality Environmental Testing Temperature And Humidity Chamber 408L for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Sinuo Testing Equipment Co. , Limited
    *Subject:
    *Message:
    Characters Remaining: (0/3000)