Sign In | Join Free | My himfr.com
Home > Temperature Humidity Test Chamber >

Cold Heat Humidity And Dryness Testing Temperature And Humidity Chamber 80L

Sinuo Testing Equipment Co. , Limited
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now
    Buy cheap Cold Heat Humidity And Dryness Testing Temperature And Humidity Chamber 80L from wholesalers
     
    Buy cheap Cold Heat Humidity And Dryness Testing Temperature And Humidity Chamber 80L from wholesalers
    • Buy cheap Cold Heat Humidity And Dryness Testing Temperature And Humidity Chamber 80L from wholesalers
    • Buy cheap Cold Heat Humidity And Dryness Testing Temperature And Humidity Chamber 80L from wholesalers
    • Buy cheap Cold Heat Humidity And Dryness Testing Temperature And Humidity Chamber 80L from wholesalers
    • Buy cheap Cold Heat Humidity And Dryness Testing Temperature And Humidity Chamber 80L from wholesalers

    Cold Heat Humidity And Dryness Testing Temperature And Humidity Chamber 80L

    Ask Lasest Price
    Brand Name : Sinuo
    Model Number : SN881-80L
    Certification : Calibration Certificate (Cost Additional)
    Price : Customized
    Payment Terms : T/T
    Supply Ability : 1 sets/month
    Delivery Time : 45 days
    • Product Details
    • Company Profile

    Cold Heat Humidity And Dryness Testing Temperature And Humidity Chamber 80L


    Cold Heat Humidity and Dryness Testing Temperature and Humidity Chamber 80L


    Complied Standards & Clauses



    IEC60068-2-30:2005 “Environmental Testing-Part 2-30: Tests-Test Db: Damp heat, cyclic (12h+12h cycle), IDT”

    IEC60068-2-78:2012 “Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT”

    IEC60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT”

    IEC60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT”


    Equipment Overview



    The purpose is to confirm the product's reliability of storage and transportation under high and low temperature alternating heat and humidity. This test chamber is used for cold, heat, humidity and dryness testing of raw materials and devices such as electronics, electricians, electrical appliances, plastics, etc.


    Technical Parameters



    Technical Parameters
    Control & OperationPLC and touch screen intelligent control system

    Chamber Size


    Inner SizeExternal Size
    400*500*400 mm780*1650*1250 mm
    Temperature Range-40 °C ~+150°C
    Humidity Range20%~98%RH
    Temperature fluctuation±0.5℃
    Temperature deviation≤±2.0℃
    Humidity fluctuation≤2.5%
    Humidity Deviation≤±3%
    Heating Rate≧2-3°C/min
    Cooling Rate≧1°C/min, average no load
    Load conditionNone
    Working noise

    A sound level≤70dB(A)

    (Measured in a soundproof room with an ambient temperature of 25°C and low echo. Using A weighting, test the average of 9 points. Each test point is 1 meter away from the noise source horizontally and 1 meter above the ground.)

    Structural features
    Insulation enclosure structure

    1. Outer wall material: A3 board spraying.

    2. Inner wall material: brushed stainless steel plate SUS﹟304.

    3. Chamber thermal insulation material: 100mm high temperature resistant rigid polyurethane foam.

    4. Chamber door insulation material: 100mm high temperature resistant rigid polyurethane foam.

    Bottom structure strengthThe weight capacity of the track at the bottom of the test chamber: ≤100Kg/m² (load)
    Air conditioning channel

    1. Stainless steel long-axis centrifugal fans: 1 set/90W.

    2. Fan, heater, evaporator (also dehumidifier), drainage device, pressure balance port, adjustable air deflector, temperature sensor

    Standard configuration of test chamber

    1. Observation window: 400x600x40mm 3-layer vacuum tempered glass

    2. Flat embedded handles

    3. Door hinges: SUS #304 imported hinges

    4. Energy-saving lamp inside the chamber

    5. Lead hole: φ50mm 1 piece

    Chamber door

    1. The single-piece door opens outwards, with the hinge on the left and the handle on the right (when facing the front of the box).

    2. Equipped with a safety door locking mechanism (the door can be opened in the test room), the door is equipped with electric heat to prevent condensation, and the visible range of the insulating glass observation window (W400×H600mm). The door frame is equipped with an anti-condensation electric heating device.

    Details

    Cold Heat Humidity And Dryness Testing Temperature And Humidity Chamber 80LCold Heat Humidity And Dryness Testing Temperature And Humidity Chamber 80L


    Quality Cold Heat Humidity And Dryness Testing Temperature And Humidity Chamber 80L for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Sinuo Testing Equipment Co. , Limited
    *Subject:
    *Message:
    Characters Remaining: (0/3000)